Short URL: http://html5.org/r/2382
| SVN | Bug | Comment | Time (UTC) |
|---|---|---|---|
| 2382 | 2008-10-30 00:58 |
Index: source
===================================================================
--- source (revision 2381)
+++ source (revision 2382)
@@ -1952,44 +1952,156 @@
Gregorian calendar. <a
href="#refsGREGORIAN">[GREGORIAN]</a></p>
+ <p>The <dfn title="concept-datetime-digit">digits</dfn> in the date
+ and time syntaxes defined in this section must be characters in the
+ range U+0030 DIGIT ZERO to U+0039 DIGIT NINE, used to express
+ numbers in base ten.</p>
- <h5>Global dates and times</h5>
- <p>A <dfn title="concept-datetime">global date and time</dfn>
- consists of a specific Gregorian date, consisting of a year, a
- month, a day, an hour, a minute, a second, and a fraction of a
- second, expressed with a time zone, consisting of a number of hours
- and minutes. <a href="#refsGREGORIAN">[GREGORIAN]</a></p>
+ <h5>Dates</h5>
- <!--XXX [GREGORIAN] should point to
- <dd id="refsGREGORIAN">[GREGORIAN]</dd>
- <dd>(Non-normative) <cite>Inter Gravissimas</cite>, A. Lilius, C. Clavius. Gregory XIII Papal Bulls, February 1582.</dd>
- -->
+ <p>A <dfn title="concept-date">date</dfn> consists of a specific
+ Gregorian date with no timezone information, consisting of a year, a
+ month, and a day. <a href="#refsGREGORIAN">[GREGORIAN]</a></p>
- <p>A string is a <dfn>valid global date and time string</dfn> if it
- has the components in the following list, in the given order, and if
- the components in the list follow the constraints given after the
+ <p>A string is a <dfn>valid date string</dfn> if it has the
+ components in the following list, in the given order, and if the
+ components in the list follow the constraints given after the
list:</p>
<ol>
- <li>Four or more digits (representing the year)</li>
+ <li>Four or more <span title="concept-datetime-digit">digits</span> (representing the year)</li>
<li>A U+002D HYPHEN-MINUS character (-).</li>
- <li>Two digits (representing the month)</li>
+ <li>Two <span title="concept-datetime-digit">digits</span> (representing the month)</li>
<li>A U+002D HYPHEN-MINUS character (-).</li>
- <li>Two digits (representing the day)</li>
+ <li>Two <span title="concept-datetime-digit">digits</span> (representing the day)</li>
- <li>A U+0054 LATIN CAPITAL LETTER T character.</li>
+ </ol>
- <li>Two digits (representing the hour)</li>
+ <p>The aforementioned constraints are:</p>
+ <ul>
+
+ <li>The month <var title="">m</var> must be in the range
+ 0 ≤ <var title="">m</var> ≤ 12.</li>
+
+ <li>The day <var title="">d</var> must be in the range
+ 0 ≤ <var title="">d</var> ≤ <var
+ title="">D</var> where <var title="">D</var> is the <span
+ title="number of days in month month of year year">number of days
+ in the given month and year</span>.</li>
+
+ </ul>
+
+ <p>The rules to <dfn>parse a date string</dfn> are as follows. This
+ will either return a date, or nothing. If at any point the algorithm
+ says that it "fails", this means that it is aborted at that point
+ and returns nothing.</p>
+
+ <ol>
+
+ <li><p>Let <var title="">input</var> be the string being
+ parsed.</p></li>
+
+ <li><p>Let <var title="">position</var> be a pointer into <var
+ title="">input</var>, initially pointing at the start of the
+ string.</p></li>
+
+ <li><p><span>Parse a date component</span> to obtain <var
+ title="">year</var>, <var title="">month</var>, and <var
+ title="">day</var>. If this returns nothing, then fail.</p>
+
+ <li><p>If <var title="">position</var> is <em>not</em> beyond the
+ end of <var title="">input</var>, then fail.</p></li>
+
+ <li><p>Let <var title="">date</var> be the date with year <var
+ title="">year</var>, month <var title="">month</var>, and day <var
+ title="">day</var>.</p></li>
+
+ <li><p>Return <var title="">date</var>.</p></li>
+
+ </ol>
+
+ <p>The rules to <dfn>parse a date component</dfn>, given an <var
+ title="">input</var> string and a <var title="">position</var>, are
+ as follows. This will either return a year, a month, and a day, or
+ nothing. If at any point the algorithm says that it "fails", this
+ means that it is aborted at that point and returns nothing.</p>
+
+ <ol>
+
+ <li><p><span>Collect a sequence of characters</span> in the range
+ U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). If the collected
+ sequence is not at least four characters long, then
+ fail. Otherwise, interpret the resulting sequence as a base-ten
+ integer. Let that number be the <var title="">year</var>.</p></li>
+
+ <li><p>If <var title="">position</var> is beyond the end of <var
+ title="">input</var> or if the character at <var
+ title="">position</var> is not a U+002D HYPHEN-MINUS character,
+ then fail. Otherwise, move <var title="">position</var> forwards
+ one character.</p></li>
+
+ <li><p><span>Collect a sequence of characters</span> in the range
+ U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). If the collected
+ sequence is not exactly two characters long, then fail. Otherwise,
+ interpret the resulting sequence as a base-ten integer. Let that
+ number be the <var title="">month</var>.</p></li>
+
+ <li>If <var title="">month</var> is not a number in the range
+ 1 ≤ <var title="">month</var> ≤ 12, then
+ fail.</li>
+
+ <li><p>Let <var title="">maxday</var> be the <span>number of days
+ in month <var title="">month</var> of year <var
+ title="">year</var></span>.</p></li>
+
+ <li><p>If <var title="">position</var> is beyond the end of <var
+ title="">input</var> or if the character at <var
+ title="">position</var> is not a U+002D HYPHEN-MINUS character,
+ then fail. Otherwise, move <var title="">position</var> forwards
+ one character.</p></li>
+
+ <li><p><span>Collect a sequence of characters</span> in the range
+ U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). If the collected
+ sequence is not exactly two characters long, then fail. Otherwise,
+ interpret the resulting sequence as a base-ten integer. Let that
+ number be the <var title="">day</var>.</p></li>
+
+ <li><p>If <var title="">day</var> is not a number in the range
+ 1 ≤ <var title="">month</var> ≤ <var
+ title="">maxday</var>, then fail.</li>
+
+ <li><p>Return <var title="">year</var>, <var title="">month</var>,
+ and <var title="">day</var>.</p></li>
+
+ </ol>
+
+
+
+ <h5>Times</h5>
+
+ <p>A <dfn title="concept-time">time</dfn> consists of a specific
+ time with no timezone information, consisting of an hour, a minute,
+ a second, and a fraction of a second.</p>
+
+ <p>A string is a <dfn>valid time string</dfn> if it has the
+ components in the following list, in the given order, and if the
+ components in the list follow the constraints given after the
+ list:</p>
+
+ <ol>
+
+ <li>Two <span title="concept-datetime-digit">digits</span> (representing the hour)</li>
+
<li>A U+003A COLON character (:).</li>
- <li>Two digits (representing the minutes)</li>
+ <li>Two <span title="concept-datetime-digit">digits</span> (representing the minutes)</li>
<li>Optionally:
@@ -1997,7 +2109,7 @@
<li>A U+003A COLON character (:).</li>
- <li>Two digits (representing the integer part of the seconds)</li>
+ <li>Two <span title="concept-datetime-digit">digits</span> (representing the integer part of the seconds)</li>
<li>Optionally:
@@ -2005,7 +2117,7 @@
<li>A 002E FULL STOP character (.)</li>
- <li>One or more digits (representing the fractional part of the seconds)</li>
+ <li>One or more <span title="concept-datetime-digit">digits</span> (representing the fractional part of the seconds)</li>
</ol>
@@ -2015,6 +2127,233 @@
</li>
+ </ol>
+
+ <p>The aforementioned constraints are:</p>
+
+ <ul>
+
+ <li>The hour <var title="">h</var> must be in the range
+ 0 ≤ <var title="">h</var> ≤ 23.</li>
+
+ <li>The minute <var title="">m</var> must be in the range
+ 0 ≤ <var title="">m</var> ≤ 59.</li>
+
+ <li>If present, the second <var title="">s</var> (consisting of the
+ integer part and its fractional part) must be in the range
+ 0 ≤ <var title="">s</var> < 60. (The
+ values 60 and 61 are not allowed: leap seconds cannot be
+ represented by datetime values.)</li>
+
+ </ul>
+
+ <p>The rules to <dfn>parse a time string</dfn> are as follows. This
+ will either return a time, or nothing. If at any point the algorithm
+ says that it "fails", this means that it is aborted at that point
+ and returns nothing.</p>
+
+ <ol>
+
+ <li><p>Let <var title="">input</var> be the string being
+ parsed.</p></li>
+
+ <li><p>Let <var title="">position</var> be a pointer into <var
+ title="">input</var>, initially pointing at the start of the
+ string.</p></li>
+
+ <li><p><span>Parse a time component</span> to obtain <var
+ title="">hour</var>, <var title="">minute</var>, and <var
+ title="">second</var>. If this returns nothing, then fail.</p>
+
+ <li><p>If <var title="">position</var> is <em>not</em> beyond the
+ end of <var title="">input</var>, then fail.</p></li>
+
+ <li><p>Let <var title="">time</var> be the time with hour <var
+ title="">hour</var>, minute <var title="">minute</var>, and second
+ <var title="">second</var>.</p></li>
+
+ <li><p>Return <var title="">time</var>.</p></li>
+
+ </ol>
+
+ <p>The rules to <dfn>parse a time component</dfn>, given an <var
+ title="">input</var> string and a <var title="">position</var>, are
+ as follows. This will either return an hour, a minute, and a second,
+ or nothing. If at any point the algorithm says that it "fails", this
+ means that it is aborted at that point and returns nothing.</p>
+
+ <ol>
+
+ <li><p><span>Collect a sequence of characters</span> in the range
+ U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). If the collected
+ sequence is not exactly two characters long, then fail. Otherwise,
+ interpret the resulting sequence as a base-ten integer. Let that
+ number be the <var title="">hour</var>.</p></li>
+
+ <li>If <var title="">hour</var> is not a number in the range
+ 0 ≤ <var title="">hour</var> ≤ 23, then
+ fail.</li>
+
+ <li><p>If <var title="">position</var> is beyond the end of <var
+ title="">input</var> or if the character at <var
+ title="">position</var> is not a U+003A COLON character, then
+ fail. Otherwise, move <var title="">position</var> forwards one
+ character.</p></li>
+
+ <li><p><span>Collect a sequence of characters</span> in the range
+ U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). If the collected
+ sequence is not exactly two characters long, then fail. Otherwise,
+ interpret the resulting sequence as a base-ten integer. Let that
+ number be the <var title="">minute</var>.</p></li>
+
+ <li>If <var title="">minute</var> is not a number in the range
+ 0 ≤ <var title="">minute</var> ≤ 59, then
+ fail.</li>
+
+ <li><p>Let <var title="">second</var> be a string with the value
+ "0".</p></li>
+
+ <li>
+
+ <p>If <var title="">position</var> is not beyond the end of
+ <var title="">input</var> and the character at <var
+ title="">position</var> is a U+003A COLON, then run these
+ substeps:</p>
+
+ <ol>
+
+ <li><p>Advance <var title="">position</var> to the next character
+ in <var title="">input</var>.</p></li>
+
+ <li><p>If <var title="">position</var> is beyond the end of <var
+ title="">input</var>, or at the last character in <var
+ title="">input</var>, or if the next <em>two</em> characters in
+ <var title="">input</var> starting at <var
+ title="">position</var> are not two characters both in the range
+ U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), then
+ fail.</p></li>
+
+ <li><p><span>Collect a sequence of characters</span> that are
+ either characters in the range U+0030 DIGIT ZERO (0) to U+0039
+ DIGIT NINE (9) or U+002E FULL STOP characters. If the collected
+ sequence has more than one U+002E FULL STOP characters, or if the
+ last character in the sequence is a U+002E FULL STOP character,
+ then fail. Otherwise, let the collected string be <var
+ title="">second</var> instead of its previous value.</p></li>
+
+ </ol>
+
+ </li>
+
+ <li><p>Interpret <var title="">second</var> as a base-ten number
+ (possibly with a fractional part). Let <var title="">second</var>
+ be that number instead of the string version.</p></li>
+
+ <li>If <var title="">second</var> is not a number in the range
+ 0 ≤ <var title="">second</var> < 60, then
+ fail.</li>
+
+ <li><p>Return <var title="">hour</var>, <var title="">minute</var>,
+ and <var title="">second</var>.</p></li>
+
+ </ol>
+
+
+
+ <h5>Local dates and times</h5>
+
+ <p>A <dfn title="concept-datetime-local">local date and time</dfn>
+ consists of a specific Gregorian date, consisting of a year, a
+ month, and a day, and a time, consisting of an hour, a minute, a
+ second, and a fraction of a second, but expressed without a time
+ zone. <a href="#refsGREGORIAN">[GREGORIAN]</a></p>
+
+ <p>A string is a <dfn>valid local date and time string</dfn> if it
+ has the components in the following list, in the given order:</p>
+
+ <ol>
+
+ <li>A <span>valid date string</span>.</li>
+
+ <li>A U+0054 LATIN CAPITAL LETTER T character.</li>
+
+ <li>A <span>valid time string</span>.</li>
+
+ </ol>
+
+ <p>The rules to <dfn>parse a local date and time string</dfn> are as
+ follows. This will either return a date and time, or nothing. If at
+ any point the algorithm says that it "fails", this means that it is
+ aborted at that point and returns nothing.</p>
+
+ <ol>
+
+ <li><p>Let <var title="">input</var> be the string being
+ parsed.</p></li>
+
+ <li><p>Let <var title="">position</var> be a pointer into <var
+ title="">input</var>, initially pointing at the start of the
+ string.</p></li>
+
+ <li><p><span>Parse a date component</span> to obtain <var
+ title="">year</var>, <var title="">month</var>, and <var
+ title="">day</var>. If this returns nothing, then fail.</p>
+
+ <li><p>If <var title="">position</var> is beyond the end of <var
+ title="">input</var> or if the character at <var
+ title="">position</var> is not a U+0054 LATIN CAPITAL LETTER T
+ character then fail. Otherwise, move <var title="">position</var>
+ forwards one character.</p></li>
+
+ <li><p><span>Parse a time component</span> to obtain <var
+ title="">hour</var>, <var title="">minute</var>, and <var
+ title="">second</var>. If this returns nothing, then fail.</p>
+
+ <li><p>If <var title="">position</var> is <em>not</em> beyond the
+ end of <var title="">input</var>, then fail.</p></li>
+
+ <li><p>Let <var title="">date</var> be the date with year <var
+ title="">year</var>, month <var title="">month</var>, and day <var
+ title="">day</var>.</p></li>
+
+ <li><p>Let <var title="">time</var> be the time with hour <var
+ title="">hour</var>, minute <var title="">minute</var>, and second
+ <var title="">second</var>.</p></li>
+
+ <li><p>Return <var title="">date</var> and <var
+ title="">time</var>.</p></li>
+
+ </ol>
+
+
+
+ <h5>Global dates and times</h5>
+
+ <p>A <dfn title="concept-datetime">global date and time</dfn>
+ consists of a specific Gregorian date, consisting of a year, a
+ month, and a day, and a time, consisting of an hour, a minute, a
+ second, and a fraction of a second, expressed with a time zone,
+ consisting of a number of hours and minutes. <a
+ href="#refsGREGORIAN">[GREGORIAN]</a></p>
+
+ <!--XXX [GREGORIAN] should point to
+ <dd id="refsGREGORIAN">[GREGORIAN]</dd>
+ <dd>(Non-normative) <cite>Inter Gravissimas</cite>, A. Lilius, C. Clavius. Gregory XIII Papal Bulls, February 1582.</dd>
+ -->
+
+ <p>A string is a <dfn>valid global date and time string</dfn> if it
+ has the components in the following list, in the given order, and if
+ the components in the list follow the constraints given after the
+ list:</p>
+
+ <ol>
+
+ <li>A <span>valid date string</span>.</li>
+
+ <li>A U+0054 LATIN CAPITAL LETTER T character.</li>
+
+ <li>A <span>valid time string</span>.</li>
+
<li>Either:
<ul>
@@ -2030,11 +2369,11 @@
HYPHEN-MINUS (-) character (the sign of the timezone
offset)</li>
- <li>Two digits (representing the hours component of the timezone offset)</li>
+ <li>Two <span title="concept-datetime-digit">digits</span> (representing the hours component of the timezone offset)</li>
<li>A U+003A COLON character (:).</li>
- <li>Two digits (representing the minutes component of the timezone offset)</li>
+ <li>Two <span title="concept-datetime-digit">digits</span> (representing the minutes component of the timezone offset)</li>
</ol>
@@ -2050,27 +2389,6 @@
<ul>
- <li>The month <var title="">m</var> must be in the range
- 0 ≤ <var title="">m</var> ≤ 12.</li>
-
- <li>The day <var title="">d</var> must be in the range
- 0 ≤ <var title="">d</var> ≤ <var
- title="">D</var> where <var title="">D</var> is the <span
- title="number of days in month month of year year">number of days
- in the given month and year</span>.</li>
-
- <li>The hour <var title="">h</var> must be in the range
- 0 ≤ <var title="">h</var> ≤ 23.</li>
-
- <li>The minute <var title="">m</var> must be in the range
- 0 ≤ <var title="">m</var> ≤ 59.</li>
-
- <li>If present, the second <var title="">s</var> (consisting of the
- integer part and its fractional part) must be in the range
- 0 ≤ <var title="">s</var> < 60. (The
- values 60 and 61 are not allowed: leap seconds cannot be
- represented by datetime values.)</li>
-
<li>If present, the time zone hour <var title="">h</var> must be in
the range 0 ≤ <var
title="">h</var> ≤ 23. (However, in practice, time
@@ -2085,9 +2403,6 @@
</ul>
- <p>The digits must be characters in the range U+0030 DIGIT ZERO to
- U+0039 DIGIT NINE, used to express numbers in base ten.</p>
-
<div class="example">
<p>The following are some examples of dates written as <span
@@ -2159,129 +2474,25 @@
title="">input</var>, initially pointing at the start of the
string.</p></li>
- <li><p><span>Collect a sequence of characters</span> in the range
- U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). If the collected
- sequence is not at least four characters long, then
- fail. Otherwise, interpret the resulting sequence as a base-ten
- integer. Let that number be the <var title="">year</var>.</p></li>
+ <li><p><span>Parse a date component</span> to obtain <var
+ title="">year</var>, <var title="">month</var>, and <var
+ title="">day</var>. If this returns nothing, then fail.</p>
<li><p>If <var title="">position</var> is beyond the end of <var
title="">input</var> or if the character at <var
- title="">position</var> is not a U+002D HYPHEN-MINUS character,
- then fail. Otherwise, move <var title="">position</var> forwards
- one character.</p></li>
-
- <li><p><span>Collect a sequence of characters</span> in the range
- U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). If the collected
- sequence is not exactly two characters long, then fail. Otherwise,
- interpret the resulting sequence as a base-ten integer. Let that
- number be the <var title="">month</var>.</p></li>
-
- <li>If <var title="">month</var> is not a number in the range
- 1 ≤ <var title="">month</var> ≤ 12, then
- fail.</li>
-
- <li><p>Let <var title="">maxday</var> be the <span>number of days
- in month <var title="">month</var> of year <var
- title="">year</var></span>.</p></li>
-
- <li><p>If <var title="">position</var> is beyond the end of <var
- title="">input</var> or if the character at <var
- title="">position</var> is not a U+002D HYPHEN-MINUS character,
- then fail. Otherwise, move <var title="">position</var> forwards
- one character.</p></li>
-
- <li><p><span>Collect a sequence of characters</span> in the range
- U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). If the collected
- sequence is not exactly two characters long, then fail. Otherwise,
- interpret the resulting sequence as a base-ten integer. Let that
- number be the <var title="">day</var>.</p></li>
-
- <li><p>If <var title="">day</var> is not a number in the range
- 1 ≤ <var title="">month</var> ≤ <var
- title="">maxday</var>, then fail.</li>
-
- <li><p>If <var title="">position</var> is beyond the end of <var
- title="">input</var> or if the character at <var
title="">position</var> is not a U+0054 LATIN CAPITAL LETTER T
character then fail. Otherwise, move <var title="">position</var>
forwards one character.</p></li>
- <li><p><span>Collect a sequence of characters</span> in the range
- U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). If the collected
- sequence is not exactly two characters long, then fail. Otherwise,
- interpret the resulting sequence as a base-ten integer. Let that
- number be the <var title="">hour</var>.</p></li>
+ <li><p><span>Parse a time component</span> to obtain <var
+ title="">hour</var>, <var title="">minute</var>, and <var
+ title="">second</var>. If this returns nothing, then fail.</p>
- <li>If <var title="">hour</var> is not a number in the range
- 0 ≤ <var title="">hour</var> ≤ 23, then
- fail.</li>
-
<li><p>If <var title="">position</var> is beyond the end of <var
- title="">input</var> or if the character at <var
- title="">position</var> is not a U+003A COLON character, then
- fail. Otherwise, move <var title="">position</var> forwards one
- character.</p></li>
-
- <li><p><span>Collect a sequence of characters</span> in the range
- U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). If the collected
- sequence is not exactly two characters long, then fail. Otherwise,
- interpret the resulting sequence as a base-ten integer. Let that
- number be the <var title="">minute</var>.</p></li>
-
- <li>If <var title="">minute</var> is not a number in the range
- 0 ≤ <var title="">minute</var> ≤ 59, then
- fail.</li>
-
- <li><p>Let <var title="">second</var> be a string with the value
- "0".</p></li>
-
- <li><p>If <var title="">position</var> is beyond the end of <var
title="">input</var>, then fail.</p></li>
<li>
- <p>If the character at <var title="">position</var> is a U+003A
- COLON, then run these substeps:</p>
-
- <ol>
-
- <li><p>Advance <var title="">position</var> to the next character
- in <var title="">input</var>.</p></li>
-
- <li><p>If <var title="">position</var> is beyond the end of <var
- title="">input</var>, or at the last character in <var
- title="">input</var>, or if the next <em>two</em> characters in
- <var title="">input</var> starting at <var
- title="">position</var> are not two characters both in the range
- U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), then
- fail.</p></li>
-
- <li><p><span>Collect a sequence of characters</span> that are
- either characters in the range U+0030 DIGIT ZERO (0) to U+0039
- DIGIT NINE (9) or U+002E FULL STOP characters. If the collected
- sequence has more than one U+002E FULL STOP characters, or if the
- last character in the sequence is a U+002E FULL STOP character,
- then fail. Otherwise, let the collected string be <var
- title="">second</var> instead of its previous value.</p></li>
-
- </ol>
-
- </li>
-
- <li><p>Interpret <var title="">second</var> as a base-ten number
- (possibly with a fractional part). Let <var title="">second</var>
- be that number instead of the string version.</p></li>
-
- <li>If <var title="">second</var> is not a number in the range
- 0 ≤ <var title="">second</var> < 60, then
- fail.</li>
-
- <li><p>If <var title="">position</var> is beyond the end of <var
- title="">input</var>, then fail.</p></li>
-
- <li>
-
<p>If the character at <var title="">position</var> is a U+005A
LATIN CAPITAL LETTER Z, then:</p>
@@ -2375,31 +2586,7 @@
</ol>
- <h5>Local dates and times</h5>
- <p>A <dfn title="concept-datetime-local">local date and time</dfn>
- consists of a specific Gregorian date with no timezone information,
- consisting of a year, a month, a day, an hour, a minute, a second,
- and a fraction of a second. <a
- href="#refsGREGORIAN">[GREGORIAN]</a></p>
-
- <p class="XXX">... <dfn>valid local date and time string</dfn></p>
-
- <p class="XXX">... rules to <dfn>parse a local date and time
- string</dfn></p>
-
-
- <h5>Dates</h5>
-
- <p>A <dfn title="concept-date">date</dfn> consists of a specific
- Gregorian date with no timezone information, consisting of a year, a
- month, and a day. <a href="#refsGREGORIAN">[GREGORIAN]</a></p>
-
- <p class="XXX">... <dfn>valid date string</dfn></p>
-
- <p class="XXX">... rules to <dfn>parse a date string</dfn></p>
-
-
<h5>Months</h5>
<p>A <dfn title="concept-month">month</dfn> consists of a specific
@@ -2426,18 +2613,7 @@
<p class="XXX">... rules to <dfn>parse a week string</dfn></p>
- <h5>Times</h5>
- <p>A <dfn title="concept-time">time</dfn> consists of a specific
- time with no timezone information, consisting of an hour, a minute,
- a second, and a fraction of a second.</p>
-
- <p class="XXX">... <dfn>valid time string</dfn></p>
-
- <p class="XXX">... rules to <dfn>parse a time string</dfn></p>
-
-
-
<h5>Vaguer moments in time</h5>
<p>This section defines <dfn title="date or time string">date or